Welcome to another FREE Woodworking Resource sponsored by your fellow
woodworkers at Shopsmith

Complete the short Request Form at right and we'll send you a FREE Fact Kit which includes a half-hour TV Show, "Sawdust Therapy" that is fun and entertaining to watch.
The Fact Kit explains the amazing story about the famous and affordable MARK V 5-Tools-In-1 Complete Home Woodworking System that packs the five most needed woodworking tools into a single, easy-to-use machine. 
The best part is that if you have space for a bicycle - you have room for a MARK V.

Learn the real story of why over a million folks just like you own a
Shopsmith MARK V.


Shaping Safety
Shaper Cutters
Cutter Storage
Fence Shaping
Pin Shaping

Printer friendly version of Tip -
Pg. 1-3,
Pg. 4-6, Pg. 7-9, Pg. 10-12, Pg. 13-14

Click to see larger view
Figure 9-1. The accessories used for fence shaping are: (A) shaper fence, (B) feather board guard, (C) shaper insert, (D) shaper arbor and cutter and (E) dust chute.

The difference between a plain edge and shaped one is often enough to elevate the beauty and elegance of the simplest project. The shaper not only makes it possible to embellish otherwise square, plain edges, but it also has practical applications as well. Among other things, you can form the parts of a drop leaf table joint, do drawer joints, make a tongue-and-groove joint, shape half-round or curved moldings, and so on.

The Mark V becomes a very efficient shaper when it is in the drill press mode and equipped with the special shaper accessories (Figures 9-1 and 9-2). The shaper insert should always be used to provide maximum support for the work around the cutting tool. For fence shaping the shaper fence is secured to the table. Both fence boards are adjustable endwise and front to back, so the opening for the cutters can be kept small for safety. The infeed board is screw-adjusted for depth of

Click to see larger view
Figure 9-2. The accessories used for pin shaping are: (A) circular shield and brush, (B) pins, (C) shaper arbor and cutter, (D) shaper insert and (E) dust chute.

cut. Pins that are screwed into the shaper insert are used for pin shaping.









Continue to Shaping Safety

Send For Your FREE Woodworking Fact Kit and "Sawdust Therapy" TV Show.

First Name*:
Last Name*:
Street Address*:

USA Canada

E-mail Address*:

  2009 Shopsmith Inc. All rights reserved.

Policies | Contact Us | Links | Corporate Web Site